RGB!!!

rgb!!!

Only the Polyglot is compatible with rgb.

Ingredients

assembled rgb

How-to

Compatible keyboards have three little squares on the back of the PCB. You can see it by taking off the backplate. There's one on the left and one on the right. If you have these squares/pads you can add rgb to your keyboard!

back of PCB

Solder the strips

  • Make sure your led strip lines up with the labels on the keyboard.
  • Your strip is soldered to either the left or the right, not both. You can use the adhesive to prop up the other side.
  • Make sure the data flows the correct direction.
  • Line your strip up with the board to see which direction is correct.

Left

🟥 VCC / +5V

🟩 Data >>> (flow of data is marked on the strip with an arrow)

🟦 Ground

🟥 VCC / +5V

🟩 <<< Data (flow of data is marked on the strip with an arrow)

🟦 Ground

Firmware

Get the "everything" firmware for Polyglot from the stenokeyboards-firmwareopen in new window GitHub.

You can also customize your own firmware using QMK.

Pictures

Top view of RGB PolyglotSide view of RGB Polyglot

Last Updated: 9/22/2023, 3:01:37 AM